|
Delta 28-176 9-Inch Band Saw Blade 1/8-Inch x 59-1/2-Inch, 14 Teeth per Inch

|
MSRP: $11.74
Your Price: $8.99
Savings: $ 2.75 ( 23% )
Shipping: Usually ships in 24 hours
Manufacturer: Delta
Prices subject to change. Please verify price during checkout.
|
|
|
|
|
|
|
|
Additional Delta 28-176 9-Inch Band Saw Blade 1/8-Inch x 59-1/2-Inch, 14 Teeth per Inch Information
|
This 9-inch band saw blade from Delta is a high carbon steel replacement blade with precision machined and set teeth for accuracy. It has been tension-tested for strength, and it's a general purpose blade that cuts wood, plastic, or composition materials. The 28-176 fits the Delta 9-inch band saw (28-150) and other saws that require a 59-1/2-inch blade; but this blade is also available in a 72-1/2-inch length for 10-inch band saws by Delta, Dremel, or Skil.
|
|
|
What Customers Say About Delta 28-176 9-Inch Band Saw Blade 1/8-Inch x 59-1/2-Inch, 14 Teeth per Inch:
|
|
I've been doing this for 25+ years so I know how to set up a saw for a particular blade.This blade broke after about 10 minutes. The job at hand required trimming a stack of 3/8 x 1/8 plastic strips to length.An extended fence was used which supports the plastic strip on both sides of the blade. I would give this minus 5 stars if I could. And it was probably less than 5 minutes of actual cutting. A cutout was placed in the fence at the blade position and a stop was placed in the T-Fence slot so once the blade got through the plastic it never touched the extended fence. The blade broke after about 10 minutes of use cutting straight lines in thin plastic.Since I was changing from a 1/4" blade, I had to reset all my guides, tracking and tension. The upper blade support was about 1/4" above the surface of the plastic.
|
|
|
|
|